1.2.4 inch 240*320,R61526 all viewing angle,sunlight readable , multiple interface
2. Part No:KD024FM-1
3. Other model Part No.
4. Compatible part No.
5. Display type TFT
6. Displaymode:transmissive
7. Resolution(pixels) 240*320
8. Overall size 42.72*60.26*2.1mm
10.Active Area 36.72*48.96mm
11. Operating temperature range :-20----70 C degrees
12. Storage Temperature range :-30----80°C degrees
13. interface type:
15. Backlight: 4 LED paralled
16. Viewing direction ALL
Pic 1: the photo of the front of the working LCD module
Pic 2: the photo of the front of the non-working LCD module
Pic 3: the photo of the back of the LCD module

Pic 4: Schemitics of 8 bit parallel MCU(MPU) interface with backlight circuit of
DS9300AB-04
Pic 5: Schemitics of 16 bit parallel MCU(MPU) interface with backlight circuit of
DS9300AB-04

Pic 6: Schemitics of 3-wire SPI interface with backlight circuit of
DS9300AB-04
(3-Wire SPI is supported by ILI9341 instead of R61526, If SPI is to be used,please
select KD024FM-1 V2)

Pic 7: Schemitics of 4-wire SPI interface with backlight circuit of
DS9300AB-04
(Note: 4-wire SPI interface is supported by ILI9341 only instead of R61526,
If 4-wire SPI is to be used, please kindly select KD024FM-1 V2)
Pic 8: Schemitics of 3-wire SPI 16 bit RGB interface interface with backlight circuit of
DS9300AB-04
Pic 9: Schemitics of 3-wire SPI 18 bit RGB interface interface with backlight circuit of
DS9300AB-04

Pic 10: Schemitics of 4-wire SPI 16 bit RGB interface interface with backlight circuit of
DS9300AB-04
Pic 11: Schemitics of 4-wire SPI 18 bit RGB interface interface with backlight circuit of
DS9300AB-04
Pic 12-13:Transferring board is used to amplify the LCD interface so that we can
easily and quickly to function the LCD.We tend to like making the LCD work
before designing the product
A.Lying-type connector

b. Standing-type connector
Picture 14:Conector is used to connect the LCD to the PCB via FPC,
for KD024FM-1, we recommend
10100X0XXX0,for other connectors, please contact
sale representatives.
Pic 15-18:KD024FM-1 is a very special LCD module,the display effect is very similar to OLED.
Compared with the usual LCD module, it has great difference:
|
KD024FM-1 |
Usual LCD module |
contrast |
1000:1 |
300:1 |
Brightness |
800 nits |
200 nits |
Sunlight readability |
Yes |
No |
Response speed |
0.1mS |
10mS |
viewing angle |
Full viewing angle |
12:00/6:00 |
Side viewing |
No color change |
Color get dark and dim |
Anti-static |
Strong |
Weak |
Pic 15: The photo is from the front viewing. From the front viewing, KD024FM-1 shows
much higher contrast and brightness than the usual LCD module.
Pic 16: From side view, KD024FM-1 is still clear and beautiful in display, but the usual
LCD module is almost invisable, because KD024FM-1 is of full viewing angle.
Pic 17:From bottom viewing, the usual LCD module changes the color while KD024FM-1
remains the same color.
Pic 18: Under the sunlight, KD024FM-1 is clearly visable,there is almost no
difference from that of indoor use, but under sunlight,90% color is missing on the transflective
LCD module, the display is black and white.